标准

A1008/A1008M-02e1

Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, (Vol. 01.03)

A109/A109M-00e1

Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled, (Vol. 01.03)

A1011/A1011M-02

钢，薄板和带的标准规范，热卷，碳，结构，高强度低合金和高强度低合金，具有改善的表现性（第01.03卷）

A131/A131M-01

Standard Specification for Structural Steel for Ships (Vol. 01.04)

A183-98

碳钢轨道螺栓和螺母的标准规范（第01.04卷）

A209/A209M-98

无缝碳纤维合金钢锅炉和过热管的标准规范（第01.01卷）

A214/A214M-96(2001)

Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes, (Vol. 01.01)

A283/A283M-00

Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

A308-02

Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

A309-01

通过三个点测试在Terne板上的重量和涂层组成的标准测试方法

A370-02E1

钢铁机械测试的标准测试方法和定义（第01.01卷）

A409/A409M-01

Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

A463/A463M-02a

Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

A480/A480M-02

标准规格，规范扁平不锈钢和耐热钢板，薄板和带的一般要求

A500-01a

Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

A513-00

电阻焊接碳和合金钢机械管的标准规范

A53/A53M-01

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. (Vol. 01.01)

A568/A568M-02

钢，薄板，碳和高强度，低合金，热卷和冷卷的标准规范

A572/A572M-01

Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

A599/A599M-02

锡磨产品，电解锡涂层的标准规范

A603-98

镀锌钢结构线绳的标准规范

A623-02

锡厂产品的标准规范，一般要求

A624/A624M-98

锡磨产品，电解锡板的标准规范，单个还原

A630-98

测定电解锡板的锡涂权重的标准测试方法

A632-02a

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

A635/A635M-02

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements

A653/A653M-02a

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

A656/A656M-00a

Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

A659/A659M-97（2001）

Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

A682/A682M-02

Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements

A749/A749M-97

钢，条，碳和高强度，低合金，热卷，一般要求的标准规范

A754/A754M-96（2000）

X射线荧光钢上金属涂层的涂料重量（质量）的标准测试方法

A767/A767M-00b

Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

A792/A792M-02

Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

A793-96(2001)

滚动地板板的标准规范，不锈钢

A875/A875M-02a

钢板的标准规范，锌-5％铝合金涂层的热浸工艺涂层

A879-00

钢板的标准规范，由电解过程涂有锌，用于应用于每个表面上涂层块的应用

A90/A90M-01

Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

A924/A924M-99

Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

A520

Standard Specification for Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction (Discontinued 2000) No Replacement

A851

高频感应焊接，未经通道的奥斯丁钢冷凝器管（2002年停产）的标准规范

A366/A366M

商业钢（CS）表的标准规范，碳（最大百分比）冷卷（撤回2000）被A1008/A1008M代替

A569/A569M

钢，碳（最大0.15，百分比），热卷纸和带状商业广告（撤回2000）的标准规范取代了A1011/A1011M

A570/A570M

钢，床单和条纹，碳，热卷（撤回2000）的标准规范取代了A1011/A1011M

A607

钢，薄板和带，高强度，低合金，横幅或钒的标准规范，或两者都被热卷和冷卷（撤回2000年），取而代之的是A1008和A1011/A1011M

A611

Standard Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

A620/A620M

Standard Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M

A622/A622M

绘图钢（DS），薄纸，碳，热卷（撤回2000）的标准规范被A1011/A1011M代替

A715

Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability (Withdrawn 2000) Replaced by A1008/A1008M

A715

钢板和带，高强度，低合金，热卷和钢板的标准规范，冷卷，高强度，低合金，并改善了可表现性（撤回2000），被A1011/A1011M代替

A907/A907M

钢，薄板和带的标准规范，重厚度线圈，碳，热卷，结构质量（撤回2001），取而代之的是A1018/A1018M

A935/A935M

Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled (Withdrawn 2001) Replaced by A1018/A1018M

A936/A936M

Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability (Withdrawn 2001) Replaced by A1018/A1018M

A963/A963M

深色绘图钢（DDS），纸，碳，冷卷（撤回2000）的标准规范被A1008/A1008M代替

A969/A969M

额外深色钢（EDD），纸张，碳，冷卷（撤回2000）的标准规范被A1008/A1008M代替

A616/A616M

轨道钢变形的标准规范和混凝土钢筋的普通杆（撤回1999）被A996/A996M代替

A617/A617M

Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999) Replaced by A996/A996M

A864/A864M

钢丝的规格，变形，用于预应力的混凝土铁路领带（撤回1997）无替换

A584

铝制钢织线围栏织物的标准规范（2002年停产）

A585

Standard Specification for Aluminum-Coated Steel Barbed Wire (Discontinued 2002) Replaced by A121

F1222

Classification for Hardware for Wood Fencing (Discontinued 2000) No Replacement